Inner Dividing Systems
Ambia-Line
A modular frame-and-divider system for the inside of a drawer — frames sit anywhere on the drawer floor, held by magnets and anti-slip feet, and cross dividers inside them slide to fit the contents. No tools to install, and the layout changes with what you cook, wear or file.
- Frames position anywhere on the drawer floor — no screws, no brackets
- Held by magnets to adjacent frames and anti-slip feet on the base
- Flexible cross dividers slide within each frame to fit the contents
- Accessories: cutlery inserts, spice holders, foil dispensers, pot-and-lid galleries
- Fits inside LEGRABOX and MERIVOBOX drawer systems
- Suits kitchens, hallways, offices, bathrooms, wardrobes — one system, every drawer
Best specified drawer by drawer so each interior fits the way it’s used.
Orga-Line
A stainless-steel container-and-divider system for the inside of a drawer — containers and lateral/cross dividers arrange freely, and every piece is dishwasher-safe, so a spill or a leaking oil bottle isn’t a permanent stain. Built for kitchen drawers of every depth.
- Stainless-steel containers — dishwasher-safe, resistant to spills and staining
- Flexible lateral and cross dividers reconfigure without tools
- Accessories: cutlery inserts, knife holders, plate holders, spice racks, foil dispensers
- Fits inside TANDEMBOX, MOVENTO and TANDEM drawer systems
- Sized for cutlery drawers up to full-height pot-and-pan pull-outs
- Everything held in place — no rolling, no rattling on the pull
Best specified drawer by drawer so each interior fits its contents, not a generic layout.
510 All-in-One Kitchen Tool Organizer (with Tools)
A shallow drawer insert that pairs a maple organiser base with a curated 12-piece tool set — everything a working kitchen reaches for daily, laid flat in its own slot, ready to lift out and use.
- 12 tools: rolling pin, boning knife, pizza knife, peeler, plane knife, oil brush, can opener, wine bottle opener, vacuum cork, electronic scale, blender
- Natural maple, food-grade wood wax oil finish — food-safe, wipes clean
- Two depths: 420 / 470 mm (16.5 / 18.5″) for 450 or 500 mm (18 / 20″) cabinets; 57 mm (2 1/4″) high, 510 mm (20″) wide
- Every tool visible at a glance — no digging through a jar
- Modular — swap or add inserts as needs change
Best specified in the top drawer of the cook-side run so knives, scales and openers sit one motion from the counter.
Adjustable Bowl Organizer
A stepped bowl rack that holds five bowls upright in a theatre-style arc — each bowl visible above the one in front of it, no digging through a stack. Slots into a shallow pull-out drawer as a modular insert in the plate-and-bowl range.
- Holds up to 5 bowls, stacked in an upright tiered arc
- Every bowl visible at a glance; grab any one without disturbing the others
118 × 421 × 75 mm (4 5/8″ × 16 5/8″ × 3″) — sized for a shallow pull-out drawer - Dark grey and black ABS — scratch- and water-resistant, wipes clean
- Modular — combines with plate racks, cutlery boxes, tier organisers, pot rails
- Fits inside a standard 475 mm (18 3/4″) drawer depth
Best specified in pairs or threes across the drawer so the whole bowl collection sits in one row, not a corner stack.
Adjustable Plate Organizer
A stepped plate rack that holds ten plates upright in a theatre-style arc — each plate visible above the one in front, so you pick by size, not by feel. Slots into a shallow pull-out drawer as a modular insert in the plate-and-bowl range.
- Holds up to 10 plates, stacked upright in a tiered arc
- Every plate visible at a glance; grab any one without disturbing the others
- 197 × 421 × 75 mm (7 3/4″ × 16 5/8″ × 3″) — sized for a shallow drawer
- Dark grey and black ABS — scratch- and water-resistant, wipes clean
- Modular — combines with bowl racks, cutlery boxes, tier organisers, pot rails
- Fits inside a standard 475 mm (18 3/4″) drawer depth
Best specified beside the bowl organiser so a full setting — plates in one, bowls in the next — sits in one drawer.
Extendable Plate Lifter
A portable plate carrier that extends to hold anything from a side plate to a dinner plate — 180 to 300 mm (7″ to 11 3/4″) across. Lifts out of the drawer by an ergonomic handle so a stack of plates goes to the table in one trip, not three.
- Extendable frame fits plate diameters from 180 to 300 mm (7″ to 11 3/4″)
- Ergonomic handle — carry the whole stack from cupboard to table
- Stable base holds shape under a full load
- 203 × 165 × 195 mm (8″ × 6 1/2″ × 7 5/8″) — sits inside the modular drawer
- Dark grey and black ABS — scratch- and water-resistant, wipes clean
- Modular — pairs with the bowl and plate racks from the same range
Best specified in the drawer nearest the dining room so the plates for a set table are already assembled before the food is.
Sliding Tier Organizer
A two-tier organiser with an upper tray that slides back to expose the lower compartment — one drawer holds twice as much without giving up quick access. The tray glides smoothly and lifts out for cleaning; the base is waterproof and stain-resistant.
- Two-tier design — upper tray slides back to reveal the deeper lower bay
- Upper tray lifts out for a full wash
- Waterproof, stain-resistant surface — wipes clean
- 225 × 416 × 205 mm (8 7/8″ × 16 3/8″ × 8″) — sized for a taller pull-out drawer
- Dark grey and black ABS
- Modular — swap or add other inserts from the same range
Best specified where you need cutlery on top and small utensils, corkscrews or spice jars underneath — one drawer, two functions.
Yacht Cutlery Organizer
A two-tier cutlery box shaped like a yacht deck — a compact upper section for the pieces used daily, an elongated lower section for serving and speciality cutlery. The upper layer lifts out by its ergonomic handles for washing or for full-depth access to the base.
- Two-tier structure — compact top over an elongated bottom bay
- Removable upper layer with ergonomic handles — lift out, wash, drop back in
- 230 × 416 × 206 mm (9 1/16″ × 16 3/8″ × 8 1/8″) — sized for a taller pull-out drawer
- Dark grey and black ABS — scratch- and water-resistant, wipes clean
- Modular — combines with the bowl and plate racks from the same range
Best specified in the drawer nearest the dining table so everyday knives and forks sit above the serving pieces you reach for less.
Divider Strip, Closet
A slim adjustable strip that splits a wardrobe drawer into compartments — position it wherever you want the divide, in a horizontal run across the drawer or a vertical run along it. Two lengths for two drawer sizes; two heights to suit the contents.
- Two lengths: 445 mm / 17 1/2″ and 288 mm / 11 3/8″
- Two heights: 70 mm / 2 3/4″ for taller contents; 48 mm / 1 7/8″ for shallow layouts
- 21 mm / 13/16″ profile — thin enough to gain a compartment without losing volume
- Horizontal or vertical orientation, positioned freely within the drawer
- Pilgrim-grey frame — matches the rest of the wardrobe interior system
Best specified in pairs or threes per drawer — one strip is a divider, two turn it into a grid of small compartments.
Leather Fixed Tray, Closet
A leather-lined fixed tray mounted inside the wardrobe, with six trouser hangers that slide across its width — trousers hang uncreased at their fold, in view, lifted out by the hanger rather than pulled off a rail.
- 6 sliding trouser hangers — smooth glide, no creasing at the fold
- Fixed mount — sits at set height, no runners
- Dual-sided fastening — mounts on either wardrobe side wall
- Water-based leather tray surface — soft, wipes clean, eco-friendly
- Orange leather tray in a pilgrim-grey frame — matches the pull-out tray from the same range
- 550 × 489 × 187 mm (21 5/8″ × 19 1/4″ × 7 3/8″)
Best specified beside the pull-out tray—one holds trousers, the other holds shoes, folded knits, or accessories on a leather surface at eye level.
Spice Holder
A tilted rack for a drawer full of spice jars — jars angle forward so you read every label from above, pull the one you want, drop it back without lifting a shelf. Two widths, two capacities.
- 8 jars — 212 × 173 × 120 mm (8 3/8″ × 6 3/4″ × 4 3/4″), fits a 300 mm / 12″ cabinet
- 14 jars — 362 × 173 × 120 mm (14 1/4″ × 6 3/4″ × 4 3/4″), fits a 450 mm / 18″ cabinet
- Angled rack — every label visible when the drawer opens, no rummaging
- Stainless steel — wipes clean, no rust from a leaking jar
- Base stabilisers included; fits TANDEMBOX, MOVENTO and TANDEM deep drawers
- Jars sold separately
Best specified in the drawer nearest the hob so the spice you’re about to add is one straight grab, not a hunt through a shelf of tin fronts.
Flavouring Organizer with 4 Spice Jars
A narrow strip inside a kitchen drawer holding four refillable spice jars on a maple base — pinch of salt on the way past, without lifting a lid or reaching for the shelf above. Combines with other modules across the same drawer.
- 4 refillable spice jars — dark grey ABS with silver detail, sealed lids
Natural maple base — food-safe, wipes clean - Two depths: 420 mm / 16.5″ (for a 450 mm / 18″ cabinet) or 470 mm / 18.5″ (for 500 mm / 20″)
- 100 mm / 4″ wide, 80 mm / 3 1/8″ tall — one drawer strip, room for other modules
- Refillable jars — no plastic pouches, no branded labels
- Modular — combines with the tool organiser, knife box and other inserts
Best specified in the drawer nearest the hob so a pinch of salt, pepper or paprika is one motion from the pan.