Knife Holders

Three ways to keep a knife collection where you can find it — a drawer insert that slots the blades handle-out, a magnetic strip on the wall grid that keeps them dry between uses, a narrow module that lives beside the daily tools. Every knife on its own, none of them touching.

Knife Holder

A drawer insert that holds nine kitchen knives blade-down and handle-up — four narrow slots for paring, boning and utility blades, five wider ones for chef, bread, carving and cleaver. Handles clear of the base, blades separated so they don’t touch or dull each other.

9 slots: 4 small + 5 large
260 × 177.5 × 55.7 mm (10 1/4″ × 7″ × 2 1/4″) — sits inside a shallow drawer
Nylon base with a brushed stainless steel top; dust-grey (RAL 7037) accents
Anti-slip base — stays put when the drawer opens with force
Enclosed handle support — protects both blades and the drawer
Fits TANDEMBOX antaro drawers with the ORGA-LINE system
Lifetime warranty

Best specified in the drawer nearest the prep counter so the right knife is one motion from the board.

Nature Line Magnetic Knife Holder

A magnetic knife strip mounted on the kitchen wall grid — blades held flat against a maple face, handles up, in view. Knives dry properly between uses instead of sitting damp in a block, and the sharp edge never touches another metal piece.

Magnetic strip holds a full working set of kitchen knives
Natural maple face on a dark grey metal frame — knives sit against wood, not steel
245 × 80 × 261 mm (9 5/8″ × 3 1/8″ × 10 1/4″) — sits flat against the wall grid
Louvered grid mount — slots in without tools, repositions along the run
Scratch- and water-resistant surfaces, wipe clean

Best specified above the prep counter where the knives are used — one grab from the board, dry and visible, out of a block.

Knife Organizer Box

A narrow knife slot inside a shallow kitchen drawer — one strip wide, deep enough to lay chef, bread and utility blades flat, handles out. Combines with other modules across the same drawer so knives live beside the tools they cut with.

Single-column knife bay — blades lay flat, handles out for a straight grab
Two depths: 420 mm / 16.5″ (for a 450 mm / 18″ cabinet) or 470 mm / 18.5″ (for 500 mm / 20″)
150 mm / 6″ wide, 58 mm / 2 1/4″ tall — leaves room for other modules in the drawer
Natural maple base with dark grey ABS frame — food-safe, wipes clean
Modular — combines with the tool organiser and other inserts from the same range

Best specified in the drawer nearest the prep counter so the knife you want is one motion from the board.