Pant Organizers
Pant Organizer
A pull-out pants rack for the closet — a full-extension frame that slides to hand height, with wire hangers that each cradle one pair of trousers uncreased at the fold. Buy the complete organiser (18″ cabinet, 12 hangers) or add hangers to what you have.
- Full-extension frame with soft-close undermount slides
- Aluminium frame, powder-coated steel hangers — no snag on wool or linen
- Each hanger holds one pair by the fold — no clip marks
- Complete organiser: 18″ cabinet, 13 7/8″ deep, 2 13/16″ high; 12 hangers included
- Expansion pack: 18 wire hangers, 58 mm tall × 14″ deep, black powder-coat
- Compatible across the ENGAGE/Synergy pull-out range
Best specified with an accessory hanger for the belt and tie — trousers, belt and tie in one drawer.
Trousers Rail
An individual walnut-and-leather hanger for the pull-out trouser rack — leather-wrapped bar, beak clamp at the end that holds a folded pair without leaving a mark. Add as many as the rack needs, or replace one that’s seen a decade of use.
- Single trouser hanger — drops down for loading, retracts back into the rack
- North American walnut wrapped in water-based eco-leather — no snag, no dye transfer
- Beak-shaped clamp at the end — holds the fold, releases with one hand
375 × 84 × 22.5 mm (14 3/4″ × 3 5/16″ × 7/8″) - Walnut with russet/orange leather — matches the rest of the range
- Compatible with the pull-out trouser rack from the same range
Best specified in threes or fives — one rack, one drop, every pair of trousers uncreased.
Wallnut Pull-Out Trouser Rack
A pull-out trouser rack — full-extension slide brings the rack out to hand height, each walnut drop-down hanger holds one pair uncreased by a beak-shaped clamp. Choose the cabinet width, get the matching hanger count.
- Full-extension slide rail (L400) — every hanger reachable, no reaching back
- Drop-down per hanger — pull down to load, retracts flush when done
- Beak-shaped clamp holds the fold, one-handed release
- Walnut hangers wrapped in water-based leather — no snag, no dye transfer
- Widths and hangers: 600 mm / 5, 800 mm / 6, 900 mm / 7, 1000 mm / 8
- 460 × 52 mm (18 1/8″ × 2″) depth × height across all sizes
- Walnut and orange leather with a phantom-grey frame
Best specified in the closet bay for trousers — one drawer, one pull, every pair inspection-ready.
Walnut Pant & Skirt Hanger
A walnut hanger with a leather-lined clamp bar for trousers or skirts, plus a small ring at the base for the belt or girdle that finishes them. The clamp holds the waistband uncreased; the ring keeps the accessory next to what it goes with.
- Clamp bar for trousers, skirts or the bottom of a suit — leather-lined, no crease at the waist
- Small ring at the base for a belt, girdle or narrow scarf
- North American walnut with eco-leather accents and zinc-alloy fittings
- 375 × 32 × 222 mm (14 3/4″ × 1 1/4″ × 8 3/4″) — narrow on the rail
- Two finishes: khaki or saddle orange — both walnut, differ in tone
- Hangs on any closet rail; slide along to reorder
Best specified beside the suit & dress hanger so bottoms and tops share one column, each paired with its own belt or tie.
Trouser Hanger
An individual pilgrim-grey trouser hanger for the leather fixed tray — nuthatch-shaped clip, slim profile, works right-side up for trousers and upside down for other uses. Add as the tray fills or replace one that’s worn out.
- Single hanger — clips onto the hanger attach bar or leather fixed tray
- Nuthatch-shaped bionic clamp — holds the waistband without creasing
- Reversible — hang trousers one way, drape lighter items the other
- 420 × 17 × 100 mm (16 1/2″ × 5/8″ × 4″) — slim enough to run several across one tray
- Pilgrim-grey frame — matches the rest of the wardrobe interior
- Compatible with the leather fixed tray and hanger attach bar from the same range
Best specified in sixes — one hanger per pair, whole trouser rotation on display at once.
Leather Pull-Out Trouser Rack
A pull-out trouser rack — full-extension slide brings the rack out to hand height; leather-covered aluminium hangers drop down to load one pair each. Higher hanger density than the walnut version — same drawer, more trousers.
- Full-extension slide rail (L400) — every hanger reachable, no reaching back
- Drop-down per hanger — pull down to load, retracts flush when done
- Leather-covered aluminium hangers with type-splice ends — stable across sizes
- Three widths, matched hanger counts: 800 mm / 11, 900 mm / 13, 1000 mm / 15
- 445 × 71 mm (17 1/2″ × 2 3/4″) depth × height across all sizes
- Khaki leather rack with khaki-and-phantom-grey frame
Best specified when the trouser rotation is deep — chinos, wool trousers, denim, formal — all on one drawer, all uncreased.