Supports
Wardrobe Tube End Support, TAG Signature Collection
The end bracket that anchors the oval closet rod to the wardrobe wall. Cast in zinc for a firm, non-flexing seat and finished to match the rod, so the join between rail and cabinet reads as one continuous piece. Mounting hardware included; sold individually so long runs and short bays can be specified from the same part.
- Overall 32 × 45 mm (1 1/4″ × 1 3/4″)
- Solid zinc, mounting hardware included
- Six finishes to match the rod: polished chrome, matte gold, matte nickel, matte aluminum, dark oil-rubbed bronze, slate
- Sized for the oval closet rod (19 × 32 mm profile) in the same collection
Best specified as a pair with the oval closet rod for a clean, hardware-matched wardrobe run.
Wardrobe Tube End Support, TAG Synergy Collection
The end bracket that anchors the round closet rod to the wardrobe wall. Cast in zinc with a fully enclosed collar around the rod, so a full run of hanging clothes rides square without twisting or lifting. Finished to match the rod, so the join at the cabinet wall reads as one continuous piece. Sold individually — order one per rod end.
- Sized for the 1 5/16″ (33 mm) round closet rod in the same collection
- Solid zinc, fully enclosed rod collar
- Five finishes: polished chrome, matte nickel, matte aluminum, black, powder-coated white
- Mounting hardware sold separately, so screw type can match cabinet build
Best specified as a pair with the round closet rod for a clean, hardware-matched wardrobe run.
Wardrobe Tube Support with Dowels, for Oval Wardrobe Tubes
A tool-free end support for the aluminum oval closet rod, keyed for 32 mm system holes so it drops straight into a standard European cabinet layout. Two integrated dowels register the bracket to the panel; a single screw hole through the flange locks it down against a full load of hanging clothes. Cast in zinc, finished to match the rod.
- Sized for the 30 × 15 mm (1 3/16″ × 9/16″) oval aluminum closet rod
- Two integrated dowels for 32 mm (1 1/4″) system-hole mounting
- Single 3.5 mm countersunk screw for reinforcement
- Die-cast zinc; finishes: chrome, matte nickel, matte aluminum, nickel, dark oil-rubbed bronze
Best specified where the cabinet already carries a 32 mm system-hole grid.
Work Surface Brackets, Rigid
A heavy-duty folded-steel bracket that carries a countertop, desk or workbench without a leg underneath. The arms are two different lengths, so a single bracket fits two counter depths depending on which way it is mounted. A 3/4″ × 1 1/2″ notching system aligns the brace on the wall for a straight, level run; two conduit holes pass power and data through the bracket to the counter.
- Five sizes to counter depth: 8×12″, 15×18″, 18×15″, 21×28″, 28×21″
- Load capacity: 1000 lbs (454 kg) per pair on 16″ (406 mm) centers
- Countersunk screw holes for #8 flush-mount screws
- Two conduit holes for electrical and low-voltage runs
- Finishes: epoxy-coated (white, black) or stainless steel
Best specified for floating desks, breakfast bars and reception counters.
Garment Clip
A pair of soft-grip clips that snap onto the wire pants hanger to hold skirts, trousers or shorts by the waistband. The plastic jaws grip firmly without leaving a crease line, so a folded pair sits square on the rail instead of sliding off, and the waistband stays true when the garment is lifted off.
- Material: plastic, black
- Height 58 mm (2 5/16″)
- Sized for the wire pants hanger in the same collection
Best specified in pairs, one per wire pants hanger, for a wardrobe run that hangs bottoms alongside tops.
Shelf Support
A spoon-shaped shelf pin that seats into a standard 5 mm drilling and cradles the underside of a wooden shelf. The wide spoon spreads the load across a broader footprint than a plain dowel pin, so a full set holds heavy shelves — books, dishes, hardware — without denting the underside. Nickel-plated steel, visually quiet, tested to industry standard.
- Pin diameter 5 mm (13/64″), pin length 8 mm (5/16″)
- Drilling required: 5 mm hole
- Steel, nickel-plated
- Load capacity: 80 kg (176 lbs) per set of four
- Meets ANSI/BHMA A156 §4.8.2 Test 7
Best specified as the standard adjustable-shelf pin throughout a cabinet run — kitchens, wardrobes, bookcases, bathrooms.